Please enter your email address and we will reply to your email.
The seals are intended to fit into the seal grooves in the housing. They accommodate a variety of operating and ambient conditions.
Designs and variants
End covers
End covers are static seals, which can be inserted in the seal groove when the housing is used at the end of a shaft.
| Designation | Diameter | Width |
| D [mm] | B [mm] | |
| ASNH 505 | 40.2 | 5 |
| ASNH 506-605 | 45.2 | 5 |
| ASNH 507-606 | 55.4 | 5 |
| ASNH 508-607 | 60.4 | 5 |
| ASNH 509 | 65.4 | 5 |
| ASNH 510-608 | 71.4 | 5 |
| ASNH 511-609 | 76.4 | 5 |
| ASNH 512-610 | 81.5 | 5 |
| ASNH 513-611 | 86.5 | 5 |
| ASNH 515-612 | 96.5 | 5 |
| ASNH 516-613 | 102 | 5 |
| ASNH 517 | 107 | 5 |
| ASNH 518-615 | 112 | 5 |
| ASNH 216 | 117.5 | 5 |
| ASNH 217 | 121.6 | 5 |
| ASNH 218 | 129.6 | 5 |
| ASNH 519-616 | 142.1 | 6 |
| ASNH 520-617 | 148.6 | 6 |
| ASNH 522-619 | 158.6 | 6 |
| ASNH 524-620 | 168.6 | 6 |
| ASNH 526 | 178.6 | 6 |
| ETS 3134 R | 184 | 21 |
| ETS 3036 R | 186 | 21 |
| ETS 34 | 186 | 21 |
| ASNH 528 | 188.8 | 6 |
| ETS 3136 R | 195 | 21 |
| ETS 36 | 196 | 21 |
| ASNH 530 | 203.8 | 6 |
| ETS 38 | 206 | 21 |
| ETS 3034 | 212 | 21 |
| ASNH 532 | 213.8 | 6 |
| ETS 3140 R | 216 | 21 |
| ETS 40 | 216 | 21 |
| ETS 3036 | 222 | 21 |
| ETS 3038 | 232 | 21 |
| ETS 3144 R | 235 | 21 |
| ETS 44 | 236 | 21 |
| ETS 3040 | 242 | 21 |
| ETS 3148 R | 255 | 21 |
| ETS 48 | 256 | 21 |
| ETS 3044 | 262 | 21 |
| ETS 3052 R | 275 | 21 |
| ETS 52 | 276 | 21 |
| ETS 3048 | 282 | 21 |
| ETS 3152 R | 286 | 21 |
| ETS 56 | 296 | 21 |
| ETS 3052 | 302 | 21 |
| ETS 60 | 316 | 21 |
| ETS 3056 | 322 | 21 |
| ETS 64 | 336 | 21 |
| ETS 68 | 356 | 21 |
| ETS 72 | 376 | 21 |
| ETS 76 | 396 | 21 |
| ETS 3176 R | 405 | 21 |
| ETS 80 | 417 | 21 |
| ETS 84 | 437 | 21 |
| ETS 88 | 457 | 21 |
| ETS 92 | 477 | 21 |
| ETS 96 | 497 | 21 |
| ETS 500 | 517 | 21 |
| ETS 530 | 547 | 21 |
